M10 x 130mm High Tensile Anchor Allthread Studs with Setting Tool - Box of 10

In stock
SKU: JSTUD10130HT
Thread Diameter M10 (10mm)
Thread Length  130mm
Min Drill Hole Depth 90mm
Material Zinc Plated
Setting Tool Supplied 1
Box Quantity 10

  • Grade 8.8 zinc plated and yellow passivated 
  • For use with glass spin in capsules or injection resin system
  • Supplied complete with nut and washer
  • The studs have external hexagon drive units with one drill bit drive unit in each box of 10
  • Each stud has a depth mark to indicate correct setting depth and a chisel point to facilitate appropriate mixing when using glass spin in capsules
  • For load data see the appropriate chemical product
Show Price without VAT
£12.95 £10.79

Performance Data

The below data is only relevant to the studs, it is not an indication of achievable fixing load, this will be determined by the type of resin, concrete strength or any other base material or anchors they are used with

SIMILAR ITEMS

Copyright © 2013-present Magento, Inc. All rights reserved.