{"id":1228,"date":"2020-10-28T17:42:30","date_gmt":"2020-10-28T17:42:30","guid":{"rendered":"http:\/\/www.gsproducts.co.uk\/blog\/?p=1228"},"modified":"2024-01-19T13:27:43","modified_gmt":"2024-01-19T13:27:43","slug":"steel-wire-trellis-systems-customer-photos","status":"publish","type":"post","link":"https:\/\/www.gsproducts.co.uk\/blog\/steel-wire-trellis-systems-customer-photos\/","title":{"rendered":"Steel wire trellis systems – customer photos"},"content":{"rendered":"

Here at GS Products we know first hand that the best feedback comes from our customers, we have kindly been sent some photos of steel wire rope trellis wall systems once they have been fitted and they look great – i am sure you will agree. If you have any pictures you would like to share with us of your stainless steel wire trellis systems please email them to us on sales@gsproducts.co.uk<\/a><\/p>\n

 <\/p>\n

Below are some stunning examples….<\/p>\n

\n

Below is another great example of a diamond formation, remember with our trellis kits you can design them and install the how you like, the set up below has been installed straight onto painted rendered masonry to give that wow effect to a stunning garden courtyard in Wiltshire, a 2meter x 2 meter kit was used here<\/a><\/p>\n

 <\/p>\n

\"\"<\/a><\/p>\n

 <\/p>\n

\n

This is an example of a steel wire trellis system used with wooden cladding in Bewdley, West Midlands<\/p>\n

\"\"<\/a><\/p>\n

 <\/p>\n

 <\/p>\n

\n

Below is another superb installation onto a red brick garden wall, a 2 meter x 1 meter trellis kit<\/a> was used here along with superb landscaping to give a real rustic, warm and clean environment.<\/p>\n

 <\/p>\n

\"\"<\/a><\/p>\n

 <\/p>\n

\n

 <\/p>\n

The beauty of our trellis wire kits<\/a> is that you get everything you need in the kit, the only tools you will require are a drill, a 10mm drill masonry bit and spanners or pliers, we also recommend some chalk and a measuring tape to carefully plan your grid system out before you start. All stainless components supplied in the kit are A4-AISI 316 stainless steel so they will never rust and offer a great finish for many years<\/p>\n

A typical grid has 50cm spacings, if you require smaller spacings we recommend 33cm, the grid does in our opinion look best when symmetrical but this is down to the end user. The spacings can be as big or as small as you like. The easiest way to determine the grid spacings and pattern of the trellis wire system is to take into account the wall space that the system will occupy and also which type of plants you plan on growing<\/p>\n

All components in the kit can be purchased individually if your system requires – please see our Trellis category here for extras<\/a><\/p>\n

 <\/p>\n

\n

 <\/p>\n

Which plants are best for wire trellis systems?<\/strong><\/p>\n